Purline ® Woodstove Sonata 16 Kw to 22 Kw, between the chimney and the stove.

Woodstove Sonata 16 Kw to 22 Kw, between the chimney and the stove

Sonata is a wood stove that is between the wood stove and fireplace. Sonata consists of a base, of the combustion chamber and the cap.

From an aesthetic point of view, Sonata is with neat finishing dark gray epoxy paint , the cap is made of steel covering the stove and bringing the height to the stove and modern touch .
On the sides the plates in steel increase the overall impression of quality of the assembly.
Handles and knobs slides are of good qualitie, in brushed and galvanized steel.

The set is elegant, neat, with very large window to admire the lights.

SONATA has a primary air inlet and a secondary air inlet. This is very convenient because this allow to a very simple lighting to the stove and also a fine adjustment to the combustion.

The glass clean system is convenient because it allows to keep the glass of the stove "clean" longer than normal.
The combustion chamber of SONATA is dressed with vermiculite firebricks. These bricks have two important functions, the first is to protect the steel of the stove when the temperature rise too fast and the other to is the inertia effect , to prolong the heat capacity to the end of the outbreak.

The first point is essential, because, in fact,the steel is more sensitive than the melting deformation during rapid temperature rise, especially at this power level, the rise in temperature can be very brutal, this explains why all stoves by PURLINE® mark (except Eco Cook which has double wall) have firebricks to protect the structure of the wood burning stove.

SONATA is designed for generating a convection in your parts, and, quite naturally.
Effect of Convection but how and why?

SONATA is designed with a double wall around the combustion chamber. This double wall is composed, on one side of the fireplace is hot and which causes the warm air upward, and the other side of the ceramic, which leads the colder cooler air down.
Escaping from the two openings located on the top of the stove, the hot air creates a movement of air which promotes homogenization of the hot air in your room. SONATA is not a simple wood stove that heats by radiation but also by convection, which allows him to ride in the temperature of your pieces faster.
In so doing, ceramics have another advantage, they allow, in case of accidental contact with the stove, to avoid serious consequences that could contact a cast iron or steel pan.
Another side effect of the ceramics and made the distance to combustible martial during installation is greatly reduced as normalized to 40 cm

SONATA, has a huge door and a window with 2, a fireproof fabric seal type, sealing the perfect way combustion chamber. Opening the door of the stove, you will have access to a large ashtray, convenient to empty, and combustion chamber in which the refractory bricks and cast iron grid will be at your fingertips.

All elements can be disassembled for cleaning or change them if necessary.

Viewpoint use, SONATA is easily installed, the output is 150 mm from the top making it simple to connect. Once installed, you can use Buches 50 Cm Max.

In conclusion, SONATA is a very carefully designed stove to quickly heat the surfaces of 160-250 m², elegant and modern, will convince the most demanding of you.

SONATA is delivered in a wooden box with a fireproof glove to manipulate the stove in operation.

Characteristics :

Wooden Power: 16 Kw to 22 Kw

Recommended surface: 160-250 m²

Emission Co²: Wood 0.0907

Yield: 76.87% Wood

Dust (mg / m3): 30.9 Wood

Consumption (Kg / h): 4.9 Wood

Finish: dark gray coated steel, ceramics cream, heat-resistant glass, refractory brick, cast iron ashtray

Pipes: 150 Cm

Dimensions Cm: Width: 69 Front / Depth: 61 angles / Height 180 Cm

Combustion Chamber Dimensions: Width: 53.5 / Depth: 34/65 Cm Height Cm 52 Buches
System clean glass: Yes

Weight: 165 Kg

Distance of materials: Sides 35 Cm / 80 Cm Front / Rear 35 Cm

Certification: CE EN13240 // К-13-2010-1879-EN DIN PLUS (German standard)

Manufacturing: European.