Purline ® PEARL A wood stove for corner from 14 Kw to 18 Kw, elegant, with convection effect.

A Pearl of PURLINE ® is a wood stove 11 to14 Kw elegant, powerful and effective.

PEARL A is manufactured for over 10 years, over the years A Pearl has been improved, this being the 4th version of this wood stove full of surprise.

From an aesthetic point of view, A Pearl is a neat finish dark gray epoxy paint (black limit) is a very good bill, the upper part is made of steel covering the stove and bringing the height this stove, bringing a modern touch to the stove.
On the sides of the ceramic plates are slid between the steel studs further increasing the overall impression of quality of the assembly.
Handles are of good qualitie in brushed and galvanized steel.

A Pearl has a niche that can be used to keep warm cups or simply moisten your room by putting a water.
In the lower part of Pearl A, is a aperture for temporary storage of woods

The stove is elegant, neat, with very large window so you can admire your light

Pearl A has a primary air inlet and a secondary air inlet. This is very convenient because this allow to a very simple lighting to the stove and also a fine adjustment to the combustion.

The glass clean system is convenient because it allows to keep the glass of the stove "clean" longer than normal.
The combustion chamber of Pearl is dressed with vermiculite firebricks. These bricks have two important functions, the first is to protect the steel of the stove when the temperature rise too fast and the other to is the inertia effect , to prolong the heat capacity to the end of the outbreak.

The first point is essential, because, in fact,the steel is more sensitive than the melting deformation during rapid temperature rise, especially at this power level, the rise in temperature can be very brutal, this explains why all stoves by PURLINE® mark (except Eco Cook which has double wall) have firebricks to protect the structure of the wood burning stove.

A Pearl is designed for convection effect generated in your rooms, and that, quite naturally.
Effect of Convection but how and why?
PEARL A is designed with a double wall around the combustion chamber. This double wall is composed, on one side of the fireplace is hot and which causes the warm air upward, and the other side of the ceramic, which leads the colder cooler air down.
The hot air creates an air movement which favors the homogenization of the hot air in your room. PEARL A is not a simple wood stove that heats by radiation but also by convection, which allows him to ride in the temperature of your pieces faster.
In so doing, ceramics have another advantage, they allow, in case of accidental contact with the stove, to avoid serious consequences that could contact a cast iron or steel pan.
PEARL A, has a huge door and a window with two broken corners, an O-type flame retardant fabrics, sealing the perfect way combustion chamber. Opening the door of the stove, you will have access to a large ashtray, convenient to empty, and combustion chamber in which the refractory bricks and cast iron grid will be at your fingertips.

All elements can be disassembled for cleaning or change them if necessary.

The designers of the wood stove PEARL A have received CE and DIN, using as double combustion technology, and getting a no less remarkable performance of 76.87%, which is beyond what is required by flamme verte for exemple.
PEARL A installs easily, the output is 150 mm from the top making it simple to connect. Once installed, you can use woods 42 Cm Max.

Finally, A PEARL is a very serious Corner stove designed to heat fastly the surface 140-200 sqm, elegant and modern, he will convince the most demanding of you.

PEARL A comes in a wooden box with a fireproof glove to manipulate the stove in operation.

Characteristics :

Wooden Power: 14 Kw to 18 Kw

Recommended surface: 140-200 m²

Emission Co²: Wood 0.0907

Efficience: 76.87% Wood

Dust (mg / m3): 33.9 Wood

Consumption (Kg / h): 4.29 Bois

Finish: dark gray coated steel, ceramics cream, heat-resistant glass, refractory brick, cast iron ashtray

Smoke exit diameter: 130 Cm

Cm Dimensions: Width: 75.5 Front / Depth: 61 angles / Height 131 Cm

Combustion Chamber Dimensions: Width: 42.5 / Depth: 46/52 Cm Height Cm 42 Buches
System clean glass: Yes

Weight: 127 Kg

Distance of materials: Sides 35 Cm / 80 Cm Front / Rear 35 Cm

Certification: CE EN13240 // К-13-2010-1879-EN DIN PLUS (German standard)

Manufacturing: European.